Conex has based it's Cable
Gland Design as well as testing /
inspection methods on the performance
requirement of BS 6121 : 1989 and
EN 50014 : 1992 adding new criteria
necessary to meet particular need.
BRASS CABLE GLANDS MATERIALS
Cable
Gland are made in standard Brass (BS
2874 ) or in alternative materials
like Aluminium (BS 1474) and Stainless
Steel (A2/ A4).
BRASS CABLE GLANDS FINISHES
Cable Gland are generally supplied in
natural Brass finish. Other finishes
like Electro-Tin , Nickel and Cadmium
can be provided.
BRASS CABLE GLANDS ENTRY
THREADS
Cable Glands are normally supplied with
ISO Metric threads to BS 3643 part 2
ISO 68 / 965 series . A Constant pitch
of 1.5 mm is used up to and including
75 mm thread size. Alternative entry
threads like PG / NPT / ET etc. are
also available.
EARTHING
Electrical continuity is normally achieved
through the screwed entry into metal
boxes. Where earth short circuit protective
equipment demand positive earth connection,
a range of integral earth gland can
be provided.